Due to cramped space it ended up being quite a puzzle. With the template and bounding regions done it was just a matter of laying out the panel. As I was trying to pack in as much as I could on to the panel I had the mounting area be only 3/8″. This helps ensure that there is enough space around the edge of the panel for mounting on to an enclosure. Boundary Layersīefore doing any work I first created bounding regions for the art (the blue box) and the components (the red box). This way if you decide to edit or modify an element then all its clones will update automatically. Tip: When placing objects use the “clone” feature (i,e, Alt-D) rather than copy and paste: the crosshairs).ĭid manage to work around this problem by adding “invisible” boundary lines that have their opacity to 0%: This was a problem for non symmetric objects like the dial markings and the potentiometer components as their bounded center points do not match with their placement center points (i.e. One of the big issues I had with Inkscape was its inability to specifying an anchor point for each graphical object. This broken down into three main areas: Panel artwork, components and front panel trim: In the Templates layer I created and managed all the graphical elements needed for the panel. With this setup I could work explicitly in inches and know that everything is to scale.įinally, divided the file up into the following 7 layers: Would have liked to set the grid to every 1/32″ interval but Inkscape only allows values up to 4 decimal places to be entered: Inkscape Setupįor this project I’m trying to fit the panel on to a legal size page (14″ x 8.5″) so I created a new Inkscape file with a legal page size in portrait orientation and using inches as the units:Īnd setting a rectangular grid of 1/16″ with major lines every 1/8″: You can find all the files I created with Inkscape in the Saund-Box-Files repo up on GitHub. This was my first time using Inkscape and it performed well except for some minor deficiencies. I chose to do this with a 2D vector drawing package called Inkscape. For the Synth-DIY Experimenter Board project I needed to create my own panel layout and wiring plan.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |